|
|
|
|
|
首頁 >>> 產品目錄 >>> 日本竹中SEEKA/TAKEX >>> 光電開關
|
|
產品[takex日本竹中NT50P，NTR50P，NTL50P光電開關]資料
|
如果您對該產品感興趣的話,可以
產品名稱:
takex日本竹中NT50P，NTR50P，NTL50P光電開關
產品型號:
產品展商:
日本竹中TAKEX
簡單介紹
takex日本竹中NT50P，NTR50P，NTL50P光電開關
全新原裝takex日本竹中NT50P，NTR50P，NTL50P光電開關
|
|
takex日本竹中NT50P，NTR50P，NTL50P光電開關的詳細介紹
|
|
takex日本竹中NT50P，NTR50P，NTL50P光電開關
NT50
Rating/Performance/Specification
|
Detection method
|
Through beam
|
|
Detecting distance
|
50m
|
|
Detectiing object
|
dia.22mm or more
|
|
Power Supply
|
12-24VDC ±10% Ripple 10% or less
|
|
Current consumption / Power consumption
|
Transmitter: 30mA or less / Receiver: 35mA or less
|
|
Output mode
|
NPN open collector output
Rating: Sink current 200mA (30VDC) or less
|
|
Operation mode
|
Light ON/Dark ON (selectable with switch)
|
|
Light monitor
|
NPN open collector output
Rating: sink current 200mA (30VDC) or less
|
|
Alarm output*1
|
NPN open collector output
Rating: Sink current 200mA (30VDC) or less
|
|
Response time
|
5ms or less
|
|
Light source
|
Infrared LED (wave length 910nm)
|
|
Indicator
|
(Transmitter) P.L: Power indicator (green LED) … Illuminated when power on
OP.L: Monitor indicator (red LED) … Illuminated when emit light normally
(Receiver) OP.L: Operation indicator (red LED) …Illuminated when output on
LEVEL: Level indicator (three level display)
LEVEL1: yellow LED illuminated when light intensity of about twice as much as operation level is detected.
LEVEL2: yellow LED illuminate
|
|
Switch (SW)
|
Light ON/Dark ON Remove the case lid of the receiver Light ON … Output at light receiving
selector switch provided to access the switch. Dark ON … Output at light blocking
|
|
Materials
|
Case: Zinc die cast
|
|
Connection
|
Terminal block (screw: M3.5, width: 8.1mm)
|
|
Weight
|
Transmitter: Approx. 700g
Receiver: Approx. 700g
|
|
Accessories
|
Operation manual, Mounting bracket
|
*1 When the light intensity is LEVEL 1 or lower, the alarm is output (yellow LED turns off).
Environmental Specification
|
Ambient light (on light receiving surface)
|
50,000 lx or less (incandescent lamp)
|
|
Ambient temperature
|
-25 - +55C (Non-freezing)
|
|
Storage temperature
|
-40 - +70C (Non-condensing)
|
|
Ambient humidity
|
35 - 85%RH (Non-condensing)
|
|
Protective structure
|
IP66
|
|
Vibration
|
10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
|
|
Shock
|
1000 m/s2 / 3 times each in 3 directions
|
|
Dielectric withstanding
|
500 VAC for 1 minute (between input/output and case)
|
|
Insulation resistance
|
500 VDC, 20 MΩ or higher
|
*1 When the light intensity is LEVEL 1 or lower, the alarm is output (yellow LED turns off).
|
|
|
|
